EFI E-820 Quick Start Manual

QUICK START GUIDE
2002  Electronics For Imaging, Inc.
This Quick Start Guide provides system requirements and an overview of how to set up
your Color Controller E-820 so you can begin printing. The guide describes the initial
tasks you must perform and points you to sections in the user documentation where
the procedures are described in detail. A full set of user documentation is provided on
the User Documentation CD. A brief description of the user manuals and how to
print them follows.
The term "E-820" is used in this document to refer to the Color Controller
N :
OTE
E-820. The term "Windows 9x" is used in this document to refer to Windows 95,
Windows 98, and Windows Me.
Media pack
Your E-820 media pack should contain the following:
• User Software CD
• User Documentation CD
• Printed Quick Start Guide
• Printed Release Notes
• Kodak Gray Scale
About the documentation
Along with the printed Release Notes included in the media pack, documentation
is provided in electronic form on the User Documentation CD. The documents are
provided as Acrobat PDF (Portable Document Format) files, which are linked and
cross-referenced. A description of the documentation follows:
• The Quick Start Guide summarizes the steps for configuring the E-820 and setting
up printing. It also describes how to access the online documentation.
• The Configuration Guide
E-820 for the supported platforms and network environments. It also includes
guidelines for setting up UNIX, Windows NT 4.0/2000, and Novell NetWare
servers to provide printing services to users.
explains basic configuration and administration of the
Part number: 45028107