Rip While Receive; Auto Tray Selection - EFI Color Controller E-42B Configuration And Setup

Option
Enable RIP While Receive
Option

Auto Tray Selection

S O R
ETUP PTION EFERENCE

Rip While Receive

• To access Enable RIP While Receive, choose Configure > Server > Jobs > Enable RIP While
Receive.
Settings
(default is underlined)
On, Off
Auto Tray Selection
• To access Auto Tray Selection, choose Configure > Server > Jobs > Auto Tray Selection.
Settings
(default is underlined)
Based on media properties,
Based on paper catalog
Description
When RIP While Receive is enabled, a print job begins processing
and spooling as soon as the E-42B is Idle. Otherwise the print job
will begin processing only after it has completed spooling.
Description
Select Based on media properties to select the tray based on the
jobs media properties regardless of whether a paper catalog entry
has been assigned to that tray. All media properties (Media
Weight, Paper Size, and Paper Type) must match for the tray to be
selected.
Select Based on paper catalog if there is direct match between the
paper catalog assigned to the tray, and the paper catalog entry
defined in the job.
49