Ipsec (Internet Protocol Security) Setup - EFI Color Controller E-42B Configuration And Setup

S C C P 42
ETTING UP FROM THE OPIER ONTROL ANEL

IPSec (Internet Protocol Security) Setup

If client computers support IPSec, enable the E-42B to accept encrypted communications
from users.
Enable IPSec
Choose whether to enable IPSec on the E-42B.
Unsecure communication
Choose whether to allow unsecure communication.
Preshared key
If you previously defined a preshared key, type it in the field. All incoming communication
that uses IPSec must contain this key.