About Fiery Setup Wizard - EFI Color Controller E-42B Configuration And Setup

S
ETTING UP FROM A
3 Do one of the following:
• In the Server menu, click Configure.
• In Device Center, on the General or Users tabs, click Configure.
4 If the Fiery Setup dialog box displays, click Configure.
If you have not completed initial setup, you may want to click Fiery Setup Wizard instead.
For more information, see

About Fiery Setup Wizard

Fiery Setup Wizard guides the initial setup to configure the E-42B for the print environment.
Fiery Setup Wizard is only available for initial setup and when you reinstall system
N :
OTE
software.
The Fiery Setup Wizard guides you through the following procedure:
1 Choose a default language.
2 Specify regional settings.
3 Specify server settings.
4 Choose a print environment configuration.
A print environment configuration contains standard setup options for a particular print
environment. You can choose from one of the following configurations that best fit your print
environment:
• Graphic Arts & Proofing
• Office & Workgroup
• Production
• Transactional
You can also choose to use E-42B factory default settings for your print environment instead
of choosing a print environment configuration.
5 Configure setup options for a chosen print environment.
After completing Fiery Setup Wizard, you can make additional changes to the E-42B in
Configure.
N : If you close Fiery Setup Wizard without completing initial setup, you can open Fiery
OTE
Setup Wizard in Device Center > Configure or in WebTools > Home tab to finish initial
setup.
C C
LIENT OMPUTER
"About Fiery Setup Wizard" on page 44.
44