Introduction; About This Document - EFI Color Controller E-42B Configuration And Setup

I
NTRODUCTION

About this document

I
NTRODUCTION
This document is intended for administrators of the Color Controller E-42B, which is
referred to in this document as the E-42B.
This document primarily describes tasks that must be completed or coordinated by the
administrator before the E-42B is ready for use. It assumes that the E-42B has been unpacked
from its shipping container and that all required cables are connected from the E-42B to the
network, a power source, and the copier/printer, and that the copier/printer is operational.
If you are an administrator and plan to configure a E-42B, it is strongly recommended that
you carefully review this entire document, beginning with
network" on page 9.
This document includes information about the following:
• System Requirements
• Setting up from the Copier Control Panel
• Setting up from a Client Computer
• Setup Option Reference
• WebTools
• Back up and Restore Settings
• Administration
• Troubleshooting
"Stages of installation on the
7