Mobile Device Printing; E-42B Setup For Direct Mobile Printing; Additional Direct Mobile Printing Requirements - EFI Color Controller E-42B Configuration And Setup

Hide thumbs Also See for Color Controller E-42B:

Table of Contents

DMINISTRATION

Mobile device printing

Direct Mobile Printing allows direct wireless printing to the E-42B from supported mobile

devices. Supported mobile devices must be connected to the same wireless-network subnet as

the E-42B to print using Direct Mobile Printing.

Before using Direct Mobile Printing, configure the following settings in Configure:

• Network > Protocol > TCP/IP > Security:

Specify ports to turn or select Enable Port Filtering

Available Ports > 5353 (Multicast DNS): selected

Available Ports > 80 (HTTP): Selected

Available Ports > 631 (IPP): Selected

Available Ports > 6310 (Direct Mobile Printing): Selected

• Network > Services > Web:

Enable Web Services: Selected

Enable IPP: Selected

• Network > Services > Bonjour:

Enable Bonjour: Selected

Enable Direct Mobile Printing: Selected

• Printer > General:

Publish Print Queue: Selected

Make sure that the E-42B settings are configured as specified. Direct Mobile Printing will not

work if these settings are changed.

For more information about these settings, see Command WorkStation Help.

Direct Mobile Printing requires network and security configuration to print jobs sent from

mobile devices.

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the Color Controller E-42B and is the answer not in the manual?