Fiery System Restore - EFI Color Controller E-42B Configuration And Setup

B
ACK UP AND
T B
O BACK UP FROM
1 In Configure, click Server > Backup/Restore and then click the Backup button.
2 In the Backup dialog box, select settings and click Next.
3 Enter a file name, select a location, and click Next.
4 Click Finish.
T B
O RESTORE FROM
1 In Configure, click Server > Backup/Restore, and then click the Restore button.
2 In the Restore dialog box, browse to the configuration file that you created earlier and click
Next.
3 Select settings and click Next.
4 Click Finish.

Fiery System Restore

The E-42B system installer allows you to back up or restore the entire system to recover from
a system crash or a hard disk failure. After reinstalling system software, you can create a new
system backup partition of the E-42B, load a system recovery partition to restore the E-42B to
an earlier state, or use utilities to troubleshoot and administer the E-42B.
After selecting a system language, you must select one of the following options.
•
New Installation:
The E-42B is shipped with preinstalled system software. If you must reinstall system
N :
OTE
software, contact a service technician.
•
Restore from backup or recovery partition:
default E-42B configuration. If you have not created a backup partition, this option allows
only a recovery to the default configuration and "Restore from recovery partition" is
displayed.
•
Back up hard disk drive(s):
drive or network share location.
•
Platform Utilities:
disks, or use Windows Task Manager to administer the E-42B.
R S
ESTORE ETTINGS
/R
ACKUP ESTORE
/R
ACKUP ESTORE
Install new system software.
Back up the hard disk to external media, such as a USB flash
Use the system installer for advanced procedures, such as erasing hard
Restore an earlier backup partition, or the
52