General Setup; Server Setup - EFI Color Controller E-42B Configuration And Setup

S
ETTING UP FROM THE

General Setup

General Setup lets you specify system information that pertains to the E-42B and users.
The submenus and options appear in sequence. Default values, where applicable, are
underlined. Words shown in italics indicate that a product- or site-specific value is displayed.

Server Setup

Basic
Server Name
Default server name
Enter a name for the E-42B (a maximum of 15 characters). This is the name by which the
E-42B appears on the network. When you change the Server Name with this option, the new
name is also applied to the Windows Printing Server Name
If you set up more than one E-42B, do not give them the same name.
N :
OTE
Time Zone
List of zones
Choose the appropriate time zone from a list of supported zones.
Adjust for Daylight Saving Changes
Choose this option to adjust the system time of the E-42B when Daylight Saving Time
occurs.
Set Time Automatically
Choose whether to set the system time of the E-42B automatically by means of a time
(SNTP) server.
Time Server
List
Choose the server with which to synchronize the E-42B.
Queues
To enable users to access the utilities and WebTools or print to the E-42B over a TCP/IP
network, you must publish, at a minimum, the Hold queue, Print queue, or Sequential Print
queue. Only the queues that you publish are available to users.
Sequential Print queue allows the E-42B to maintain the print order on print runs
N :
OTE
consisting of many jobs (First In, First Out). While a Sequential Print run is taking place, all
other jobs that are not part of the run will wait to be processed.
C C P
OPIER ONTROL ANEL
(page 35).
29