Mapping A Drive To The E-42B - EFI Color Controller E-42B Configuration And Setup

A
DMINISTRATION

Mapping a drive to the E-42B

To map drives to the E-42B, you must access Windows through either the Fiery Advanced
Controller Interface or Remote Desktop.
T
O MAP A DRIVE TO A LETTER RECOGNIZED BY THE
1 From a Windows Explorer window, choose Tools > Map Network Drive.
One method of accessing an Explorer window is to choose Start > Documents >
My Documents.
2 From the Drive menu, choose a letter that is not currently mapped.
3 In the path field, type the UNC of the network computer that contains the shared resources,
or click Browse and locate the computer on the network.
4 Click Finish.
5 If you are prompted to enter a network password, type Administrator in the Connect As field,
type the password in the Password field, and then click OK.
6 Inform the user to use the drive letter in the VDP search path when the user sends the job to
the E-42B.
E-42B
67