EFI Color Controller E-42B Configuration And Setup page 28

S C C P 28
ETTING UP FROM THE OPIER ONTROL ANEL
IPv4 Address Type
Automatic, Manual
Choose whether to allow the E-42B to obtain its Ethernet IP address automatically, by
searching the network.
IP Address
127.0.0.1
If you chose Manual for IPv4 Address Type, enter the E-42B IP address for Ethernet. Unlike
an IP address set automatically, this address remains the same if you restart the E-42B. You
must change the default to a valid address for your network.
Subnet Mask
255.255.255.0
Set the subnet mask for printing with TCP/IP on your network.
Before proceeding, confirm the subnet mask setting with your network administrator.
N :
OTE
Gateway Type
Automatic, Manual
Choose the method for obtaining the gateway address for printing with TCP/IP.
Gateway Address
127.0.0.1
If you chose Manual for Gateway Type, set the gateway address for printing with TCP/IP on
your network.
Enable Web Services
On, Off
Select On to make the WebTools available to users. TCP/IP must be enabled on the E-42B
and client computers. A Java-enabled Web browser and a valid IP address or DNS host name
are required for each client computer.
Enable Remote Desktop
Enabled, Disabled
Select Enabled to enable Remote Desktop, a Microsoft application that allows users on
remote computers to manage and control the Windows desktop features of the E-42B. For
information about enabling Remote Desktop, see page 58.