Back Up And Restore Settings; Backup/Restore - EFI Color Controller E-42B Configuration And Setup

B R S 51
ACK UP AND ESTORE ETTINGS
B R S
ACK UP AND ESTORE ETTINGS
You can back up and restore selected settings or the entire E-42B configuration.

Backup/Restore

Use the Backup/Restore feature when the E-42B is operating normally and you want to apply
groups of saved configuration settings to the E-42B. For more information, see page 51.
Fiery System Restore
Use Fiery System Restore to recover from a system crash or hard disk failure. For more
information, see page 52.
Backup/Restore
Using the Backup/Restore feature in Configure, you can back up E-42B selected settings and
restore them later, without reinstalling system software. When you back up settings, you save
a configuration file with the settings.
You can back up and restore the following E-42B settings:
• Fiery system settings
• Color settings
• Scan settings
• FreeForm/VDP Resources
• Virtual printers
• Server presets
• Fonts
• Job Log
For more information, see Configure Help.
You cannot use this feature to back up or restore the Paper Catalog database. For information
about exporting the Paper Catalog database, see Command WorkStation Help.