Selecting Installation Position; Installation Of Accessories Kit - Ablerex ODIN User Manual

3.2. Selecting Installation Position

It is necessary to select a proper environment to
install the unit, in order to minimize the possibility of
damage to the UPS and extend the life of the UPS.
Please follow the advice below:
1. Keep at least 30cm (12 inches) clearance from
the rear panel of the UPS to the wall.
2. Do not block the air-flow to the ventilation
openings of the unit.
3. Please check the installation site to avoid
overheat and excessive moisture.
4. Do not place the UPS in an environment near
dust, corruptive or salty material or flammable
objects.
5. Do not expose the UPS to outdoors.
3.3.

Installation of Accessories Kit

B1 B2 S4 B1 B3 S4
S3
14