Unpacking; Selecting Installation Position; Ups Setup - Ablerex JP-PRO XL 1000 User Manual

3.3

Unpacking

1. Take the UPS out of the PE foam.
2. Remove the packing materials.
3. Standard Package includes:
a. User's Manual
b. 1pcs x AC Input Power Cord ( Not available for hard wiring connection
models)
c. 2pcs x IEC output cables ( for the UPS with IEC sockets only)
d. 1pcs x RJ11 Phone Jack Cable
e. 1set x UPS communication kit (optional)
Accessories for Tower and Rack Mount
Optional
Optional
6
3.4

Selecting Installation Position

It is necessary to select a proper environment to install the unit, in order to
minimize the possibility of damage to the UPS and extend the life of the UPS.
Please follow the instructions below:
1. Keep at least 20cm(8 inches) clearance from
the rear panel of the UPS from the wall or
other obstructions.
2. Do not block the air-flow to the ventilation
openings of the unit.
3. Please ensure the installation site
environmental conditions are in accordance
with the UPS working specifications to
avoid overheat and excessive moisture.
4. Do not place the UPS in a dusty or corrosive
environment or near any flammable objects.
5. This UPS is not designed for outdoor use.
3.5

UPS Setup

The UPS offers a flexible form factor
enabling integration into a wide variety of
environments.
The UPS with space-saving design only
occupy 2U for 1000 to 3000VA.
If you are installing the UPS in a tower,
continue to the following section, "Tower setup"
otherwise; continue to "Rack-Mount setup".
7