Important Safety Instruction; An Important Notice - Ablerex ODIN User Manual

1. Important Safety Instruction

1.1. An Important Notice

For Parallel System installation, please refer to "6/10KVA Parallel System
1.1.1.
Installation Guide"
1.1.2. This UPS is equipped with an EMI filter. To prevent potential leakage
current hazard, ensure that the AC main supply is securely grounded.
1.1.3. To ensure safety in all applications where a UPS is hard wired to the
Electrical Supply, ensure that the system is installed by a Qualified
Electrical Contractor.
1.1.4. The UPS has its own internal energy source (battery). Should the battery
be switched on when no AC power is available, there could be voltage at
the output terminals.
1.1.5. Make sure that the AC Utility outlet is correctly grounded.
1.1.6. Do not open the case, as there are no serviceable parts inside. Your
Warranty will be void.
1.1.7. Do not try to repair the unit yourself; contact your local supplier or your
warranty will be void.
1.1.8. Please ensure that the input voltage of the UPS matches the utility supply
voltage.
1.1.9. Use a certified input power cable with the correct plugs and sockets for the
appropriate voltage system.
1.1.10. To prevent any overheating of the UPS, keep all ventilation openings free
from obstruction, and do not place anything on top of the UPS. Keep the
UPS 30cm away from the wall or any other obstructions.
1.1.11. Make sure the UPS is installed within proper environment as specified.
(0-40℃ and 0-90% non-condensing humidity)
1.1.12. Do not install the UPS in direct sunlight. Your warranty may be void if the
batteries fail.
1.1.13. Install the UPS indoors as it is not designed for outdoor solutions unless it
is placed in enclosure unit.
2