Ablerex ODIN User Manual page 4

1.1.14. Dusty, corrosive and salty environments can do damage to any UPS.
1.1.15. Install the UPS away from objects that give off excessive heat and areas
that are excessively wet.
1.1.16. If liquids are split onto the UPS or foreign objects dropped into the unit, the
warranty will be null and void.
1.1.17. The battery will discharge naturally if the system is unused for any length
of time.
1.1.18. The battery should be recharged every 2-3 months if unused. If this is not
done, then the warranty will be null and void. When installed and being
used, the batteries will be automatically recharged and kept in top
condition.
1.1.19. This UPS supports electronic equipment in offices, telecommunications,
process control, medical, security applications and operating equipments.
Non-authorized technician is not allowed to install the UPS in the following
areas.
a. Medical equipment directly related to human life
b. Elevator, Metro (Subway) system or any other equipment related to
human safety.
c. Public system or critical computer systems.
1.1.20. Do not install the UPS in an environment with sparks, smoke or gas.
1.1.21. Make sure the UPS is completely turned off when moving the UPS from
one place to another. It might cause electrical shock if the output is not cut
off completely.
1.1.22. The Maintenance Bypass Switch is equipped with the UPS. Please follow
the procedures strictly to switch on/off the Maintenance Bypass Switch.
1.1.23. The UPS offers CVCF (Constant Voltage Constant Frequency) setting
function.
a. For correct setting and wiring, please contact with your local agent.
b. Do not do it by yourself; otherwise, your warranty will be void.
3