Ablerex ODIN User Manual page 25

3.5.4.2. Press
settings. The LCD display will show in consequence between Drawing
Q1(buzzer)  Drawing R1(Self-test) Drawing S1(Bypass Voltage
Windows)  Drawing T(Output Frequency Synchronization Window)
Drawing U(Inverter Output Voltage) Drawing V1(UPS Operation
Mode) Drawing W(Output Voltage Micro Tune Value) Drawing
X(UPS Id) Drawing Y(Parallel function status).
R1
R2
S1
S2
key pad to scroll down the screen and check the UPS
* It shows self-test is NOT "on".
* It shows self-test is "On".
* It shows Bypass Voltage is adjusted to narrow one.
* It shows bypass voltage is adjusted to wider one.
24