8.5.2.2
Partitioning in Windows 7 Ultimate
You will need to reconfigure the partitions after installing a new drive, to repair corrupt
partitions or to change the partitioning.
Partitioning of the HDD or SSD
In delivery state, the following default partitions are set up on the HDD or SSD for the
Windows 7 Ultimate operating system:
Partition
Primary
Second
Third
8.5.2.3
Changing the partitions under Windows 7 and Windows 10
With the disk management, you can adapt the partitioning of your drives.
You can reduce or delete an available partition to acquire unassigned memory space, which
you can use to set up a new partition or to increase an existing partition.
Note
Data lost in the case of deleting a partition!
If you delete a partition, all the data on this partition is lost.
Back up your data before you change partitions.
Requirement
You are logged on as an administrator.
Procedure - Reduce partition
A partition can only be reduced if sufficient space is available.
1. Click with the right mouse button on the partition to be reduced and click on "Reduce
size".
2. Follow the instructions.
SIMATIC IPC477E PRO
Operating Instructions, 08/2017, A5E39912462-AA
Name
Size of data medium
< 54 GB
>54 GB
Boot
100 MB
100 MB
System 40 GB
50 GB
Data
Remainder
Remainder
Maintaining and repairing the device
8.5 Installing the software
File system
>100 GB
100 MB
Automatically set up by installation
program
100 GB
NTFS not compressed
Remainder
NTFS not compressed
99