Table of Contents
Advertisement
Maintenance and service
11.3 Partitioning data media
11.3
Partitioning data media
11.3.1
Setting up the partitions under Windows XP Embedded
You need to set up the partitions on the Compact Flash card after installed a new Compact
Flash card or to repair corrupt partitions or to change the partitioning.
Partitioning the Compact Flash card
The factory state of the Compact Flash card includes the following partitions:
Partition
1. Partition
2. Partition
* Due to partitioning/formatting, the actual capacity of the Compact Flash card does not
match the memory size specified on the Compact Flash card.
In order to revert to the original factory state partitions, we recommend using the software
tool "SIMATIC PC/PG Image Creator". Detailed information about using this tool is available
in the manufacturer documentation.
11.3.2
Setting up partitions under Windows XP Professional / Windows 2000 MUI
Set up the hard disk partitions after having installed a new hard disk, or to repair faulty
partitions, or to change the partitioning.
Partitioning the hard disk
The factory state of the hard disk with Windows XP/2000 includes the following partitions:
Partition
1. Partition
2. Partition
In order to revert to the original factory state partitions, we recommend using the software
tool "SIMATIC PC/PG Image Creator". Detailed information about using this tool is available
in the manufacturer documentation.
112
Name
SYSTEM
DATA
Name
Size
SYSTEM
20 GB
DATA
Remainder
Size of card
File system
2 GB
867 MB
NTFS (compressed)
Remainder *
NTFS (compressed)
File system
NTFS (not compressed)
NTFS (not compressed)
Operating Instructions, 06/2008, A5E00927393-02
SIMATIC Box PC 627B
Advertisement
Table of Contents
