Partitioning The Data Storage Medium; Partitioning In Windows Embedded Standard 7 - Siemens SIMATIC IPC477E PRO Operating Instructions Manual

Maintaining and repairing the device
8.5 Installing the software
8.5.2

Partitioning the data storage medium

8.5.2.1

Partitioning in Windows Embedded Standard 7

You will need to reconfigure the partitions after installing a new drive, to repair corrupt
partitions or to change the partitioning.
Partitioning of the SIMATIC IPC CFast card
The SIMATIC IPC CFast card for Windows Embedded Standard 7 comes configured with
the following default partitions:
Table 8- 1
Partition
First
Second
* Due to partitioning/formatting, the actual CFast capacity does not correspond to the
memory size specified on the SIMATIC IPC CFast card.
Table 8- 2
Partition
First
Second
* Due to partitioning/formatting, the actual CFast capacity does not correspond to the
memory size specified on the SIMATIC IPC CFast card.
Partitioning of the SSD
The following partitions are configured in the delivery state of the SSD with Windows
Embedded Standard 7:
Partition
Primary
Second
To restore the partitions to their original delivery state, we recommend you use the software
SIMATIC IPC Image & Partition Creator. Additional information is available in the
accompanying documentation.
98
32-bit version of the operating system
Name Size of the card
8 GB
SYSTEM 6 GB
DATA Re-
mainder
64-bit version of the operating system
Name Size of the card
8 GB
SYSTEM 7 GB
DATA Re-
mainder
Name Size of data medium
>100 GB
SYSTEM 60 GB
DATA Remainder
File system
16 GB 30 GB
12 GB 30 GB NTFS (not compressed)
Re- Re- NTFS (not compressed)
mainder mainder
File system
16 GB 30 GB
12 GB 30 GB NTFS (not compressed)
Re- Re- NTFS (not compressed)
mainder mainder
File system
>100 GB
100 GB NTFS not compressed
Remainder NTFS not compressed
Operating Instructions, 08/2017, A5E39912462-AA
SIMATIC IPC477E PRO