Adapter Set For Support Arm And Stand Mounting Of Pro Device - Siemens SIMATIC IPC477E PRO Operating Instructions Manual

Overview
2.5 System components
2.5.3

Adapter set for support arm and stand mounting of PRO device

The PRO device can be mounted on systems from third-party vendors (see section
"Mounting the device (Page 33)"). For this you will need the Siemens base adapter (see
Base adapter (Page 15)) and a proprietary adapter set.
Siemens also offers its own adapter for VESA-compatible third-party systems:
Adapter set
SIEMENS:
•
•
RITTAL:
Adapter for
Siemens PRO-Panel
•
•
ROLEC:
Adapter for
Siemens PRO-Panel
•
•
BERNSTEIN:
Coupling for Siemens
SIMATIC PRO
•
•
Information provided without guarantee.
18
Adapter set VESA75
Adapter set VESA100
Intermediate plate
Screws
Intermediate plate
Screws
No intermediate plate re-
quired
Coupling with integrated
adaptation for PRO device
Suitable for support arm systems
VESA75-compatible systems
•
VESA100-compatible systems
•
CP40 steel
•
CP60/120 for
•
Support arm connection
120 × 65 mm
profiPlus-50
•
taraPLUS for ∅ 65 mm hole
•
circle
CS-3000
•
Operating Instructions, 08/2017, A5E39912462-AA
Article number
6AV7674-0KE00-0AA0
•
6AV7674-0KD00-0AA0
•
6206.500
•
142.024.000
•
1015300187 RAL 9006
•
white aluminum
1015300043 RAL 7016
•
anthracite gray
SIMATIC IPC477E PRO