Permitted Mounting Positions - Siemens SIMATIC IPC477E PRO Operating Instructions Manual

4.2

Permitted mounting positions

Mounting position
The mounting positions described below are permitted for the PRO devices.
● Standard mounting position: Vertical installation in horizontal format
● Inclined installation in horizontal format with a vertical inclination of maximum ±45°
Upright mounting in vertical format is prohibited for the PRO device
Device version "prepared for pedestal/extension components (flange at bottom)"
①
②
Device version "prepared for support arm without extension components (flange at top)"
①
②
SIMATIC IPC477E PRO
Operating Instructions, 08/2017, A5E39912462-AA
Mounting Deviation from the vertical
position
Inclined ≤ 45°
Vertical 0°
Mounting position
Inclined ≤ 45°
Vertical 0°
Mounting and connecting the HMI device
4.2 Permitted mounting positions
31