Technical Specifications; Certificates And Approvals - Siemens SIMATIC IPC477E PRO Operating Instructions Manual

Technical specifications

9.1

Certificates and approvals

Note
Possible approvals
The following overview shows possible approvals.
Only the approvals specified on the device apply to the device itself.
The device meets the guidelines listed in the following sections.
EU Declaration of Conformity
The associated declaration of conformity is available on the Internet at the following address:
Panel PC certificates
(http://support.automation.siemens.com/WW/view/en/10805572/134200).
ISO 9001 certificate
The Siemens quality management system for our entire product creation process
(development, production and sales) meets the requirements of ISO 9001:2008.
This has been certified by DQS (the German society for the certification of quality
management systems).
Certificate no.: 001323 QM08
Software license agreements
If the device is supplied with pre-installed software, you must observe the corresponding
license agreements.
UL approval
● UL 508 (Industrial Control Equipment)
● CSA C22.2 No. 142 (Process Control Equipment)
● ANSI/ISA 12.12.01 (Hazardous Location)
● CSA-213 (Hazardous Location) Approved for use in
● Cl. I Div. 2, GP. A, B, C, D T4
● Cl. I, Zone 2, GP. IIC T4
SIMATIC IPC477E PRO
Operating Instructions, 08/2017, A5E39912462-AA
9
103