System Components; Base Adapter - Siemens SIMATIC IPC477E PRO Operating Instructions Manual

2.5

System components

2.5.1

Base adapter

PRO devices of the type "suitable for support arm" or "suitable for stand" can be mounted on
a support arm or stand using the base adapter. Depending on the support arm system used,
an adapter plate may have to be installed in addition (see Accessories (Page 14)).
A base adapter is included with the corresponding PRO devices. The base adapter can also
be ordered separately.
①
②
③
④
⑤
Article number for the base adapter as accessory: 6AV7674-1KA00-0AA0.
See also
Prepared for support arm or stand without extension elements (flange on top) (Page 35)
Industry Mall (https://mall.industry.siemens.com)
Expansion components and accessories
based-automation/en/industrial-pc/expansion_components_accessories)
SIMATIC IPC477E PRO
Operating Instructions, 08/2017, A5E39912462-AA
Seal
Cable channel
Mechanical interface to the PRO device
Cover
Mechanical interface to support arm or stand
(http://www.automation.siemens.com/mcms/pc-
Overview
2.5 System components
15