Mounting and connecting the HMI device
4.4 Connecting the device
4.4.5
Securing the cables
Strain relief for the device is provided in the product package.
Procedure
1. Fasten the strain reliefs at the points shown.
2. Connect the USB, DisplayPort and LAN cables.
3. Secure each cable connected to the device to the strain relief using a cable tie or fixing
screws for the D-sub connectors. The required cable ties are not included.
①
4. Cut off the protruding ends of the cable ties.
52
Fastening with cable ties
SIMATIC IPC477E PRO
Operating Instructions, 08/2017, A5E39912462-AA