Siemens SIMATIC IPC477E PRO Operating Instructions Manual page 106

Technical specifications
9.1 Certificates and approvals
Marine approvals
The following ambient conditions are permitted:
● ENV1, ENV2 and ENV3
In accordance with "Lloyd's Register's Type Approval System, Test Specification Number
1 - 07/2015".
Note
EMC requirements for installation on deck and on the bridge.
When used with a filter of the type Corcom xFC10 (tested) or similar, the device fulfills the
EMC requirements for installation on deck and on the bridge.
The following marine approvals are intended for the device. After acceptance, the certificates
will be made available on the Internet
(https://support.industry.siemens.com/cs/ww/en/ps/14738/cert).
● ABS American Bureau of Shipping (USA)
● BV Bureau Vertias (France)
● DNV Det Norske Veritas (Norway)
● GL Germanische Lloyd
● Class NK Nippon Kaiji Kyokai (Japan)
FCC (USA) and ICES (Canada) Compliance
USA
Federal Commu-
nications Commis-
sion
Radio Frequency
Interference
Statement
Shielded Cables
Modifications
Conditions of
Operations
CANADA
Canadian Notice
Avis Canadien
106
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equip-
ment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accord-
ance with the instruction manual, may cause harmful interference to radio com-
munications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the inter-
ference at his own expense.
Shielded cables must be used with this equipment to maintain compliance with
FCC regulations.
Changes or modifications not expressly approved by the manufacturer could
void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
This Class A digital apparatus complies with Canadian ICES-003 (A).
Cet appareil numérique de la classe A est conforme à la norme NMB-
003 (A) du Canada.
SIMATIC IPC477E PRO
Operating Instructions, 08/2017, A5E39912462-AA