Interfaces And Operator Controls For Pro Device - Siemens SIMATIC IPC477E PRO Operating Instructions Manual

Note
The device version "prepared for support arm and extension components" is intended for
devices with an extension (see System components (Page 15)).
Bottom - device version "prepared for support arm and extension elements"
①
2.2.1

Interfaces and operator controls for PRO device

The assignment of the interfaces is shown inside the terminal compartment cover.
①
4 x USB port
②
Slot for CFast card
③
COM1/2 port (optional)
④
Display port
⑤
3 × Ethernet port
⑥
Connection terminal
24 V DC power supply
⑦
On/off switch
⑧
Protective conductor connection
SIMATIC IPC477E PRO
Operating Instructions, 08/2017, A5E39912462-AA
Cover plate
USB 3.0 high speed/high current
Behind the strain relief
Serial port, 9-pin D-sub connector
RJ45 Ethernet port, 10/100/1000 Mbps
Connection terminal inserted in delivered condition
Overview
2.2 Installation
13