Connecting A Guitar / Bass Guitar (With Headphones) - Native Instruments Komplete Audio 6 Manual

For information on how to record in your audio recording software, please refer to your
software's documentation.
6.3.3

Connecting a Guitar / Bass Guitar (with headphones)

KOMPLETE AUDIO 6 setup with guitar / bass guitar and headphones.
Make sure to have connected the KOMPLETE AUDIO 6 to your computer as described during
the installation chapter (chapter
To use the KOMPLETE AUDIO 6 in a recording setup with a guitar / bass guitar:
1. Turn the Volume Control knob
AUDIO 6 to the left-end stop to set the volume to minimum.
2. Plug a 1/4" instrument cable (unbalanced) from your instrument into either
INPUT 2 of the KOMPLETE AUDIO 6.
↑2, Installing KOMPLETE AUDIO
(MAIN VOLUME 1/2) on the top panel of the KOMPLETE
Using the KOMPLETE AUDIO 6 (Setup Scenarios)
KOMPLETE AUDIO 6 in a Recording Setup
6) of this manual.
INPUT 1
KOMPLETE AUDIO 6 - Manual - 41
or