Komplete Audio 6 With Midi Devices - Native Instruments Komplete Audio 6 Manual

You can also use
to connect a line level device with a stereo output. The
the sockets have to be set to
buttons next to the sockets to adjust the left and right channels input gain.
6.4

KOMPLETE AUDIO 6 with MIDI Devices

KOMPLETE AUDIO 6 in a MIDI controller / synthesizer setup.
Make sure the KOMPLETE AUDIO 6 is connected to your computer as described during the
installation chapter (chapter
puter's main audio output device (see chapter
Connecting Speakers for instructions on how to connect speakers (active and passive) to your
KOMPLETE AUDIO 6. To use the KOMPLETE AUDIO 6 in a setup with a MIDI controller:
1. Make sure to have the Volume Control knob
KOMPLETE AUDIO 6 turned to the left-end stop so the volume is set to minimum.
INPUT 1 and INPUT 2 on the front panel of the KOMPLETE AUDIO 6
LINE in that case and you'd use the relevant
↑2, Installing KOMPLETE AUDIO
Using the KOMPLETE AUDIO 6 (Setup Scenarios)
LINE/INST buttons adjacent to
6), and configured as your com-
↑3, Basic Configuration). See chapter
(MAIN VOLUME 1/2) on the top panel of the
KOMPLETE AUDIO 6 - Manual - 45
KOMPLETE AUDIO 6 with MIDI Devices
GAIN control
↑6.1,