Connecting Headphones - Native Instruments Komplete Audio 6 Manual

3. Turn your stereo amplifier / mixer on.
4. Turn the Volume Control knob
AUDIO 6 to the right-end stop to set the output to its maximum level.
5. Start the playback of an audio file on your computer.
6. Gradually raise your stereo console's / mixer's volume control level until you reach a good
listening level.
6.2

Connecting Headphones

KOMPLETE AUDIO 6 setup with headphones.
Make sure the KOMPLETE AUDIO 6 is connected to your computer as described during the
installation chapter (chapter
puter's main audio output device (see chapter
To use headphones with your KOMPLETE AUDIO 6:
(MAIN VOLUME
↑2, Installing KOMPLETE AUDIO
↑3, Basic
Using the KOMPLETE AUDIO 6 (Setup Scenarios)
1/2) on the top panel of the KOMPLETE
6), and configured as your com-
Configuration).
KOMPLETE AUDIO 6 - Manual - 35
Connecting Headphones