Using The Komplete Audio 6 (Setup Scenarios); Connecting Speakers; Connecting Active Monitor Speakers - Native Instruments Komplete Audio 6 Manual

6

Using the KOMPLETE AUDIO 6 (Setup Scenarios)

In this chapter, you will learn how to connect the KOMPLETE AUDIO 6 in various setup sce-
narios. Although we cannot cover all imaginable setups here, the examples are general enough
to apply the information to most situations.
Please make sure to have installed the KOMPLETE AUDIO 6 driver as described in
chapter ↑2, Installing KOMPLETE AUDIO 6
DIO 6 to your computer. The device will not work properly otherwise.
6.1

Connecting Speakers

6.1.1

Connecting Active Monitor Speakers

KOMPLETE AUDIO 6 setup with active monitors.
Make sure the KOMPLETE AUDIO 6 is connected to your computer as described during the
installation chapter (chapter
computer's main audio output device (see chapter
To use active speakers (self-powered speakers with a built-in amplifier) with your KOMPLETE
AUDIO 6:
prior to connecting the KOMPLETE AU-
↑2, Installing KOMPLETE AUDIO
↑3, Basic
Using the KOMPLETE AUDIO 6 (Setup Scenarios)
6), and is configured as your
Configuration).
KOMPLETE AUDIO 6 - Manual - 33
Connecting Speakers