Table of Contents
Advertisement
Monitor
Status: Activating the direct monitoring routes the signal of the inputs 1 and 2 di-
▪
rectly to the selected outputs (see
the computer, so you can monitor the input at zero latency.
▪ Channel: When direct monitoring is active, select to which output channels signals from in-
puts 1 and 2 will be routed.
5.1.2
Diagnostics Page
The Control Panel's Diagnostics page.
The
Diagnostics
page allows you to monitor performance and detect errors. The information
provided in this page is more of interest to advanced users; however, in case of problems with
the device, you should have a look at this page. The
tions:
Drop-Out
Detection;
the following subchapters for further information on these sections.
Channel
setting below) without sending them through
Connection
Monitor;
System erformance
Advanced Configuration on Windows (Control Panel)
Diagnostics
page consists of the four sec-
Test; and Information. See
KOMPLETE AUDIO 6 - Manual - 27
Advanced Configuration
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Komplete Audio 6 and is the answer not in the manual?
Questions and answers