Planning Detector Lines; Planning An Fdnet Detector Line - Siemens FS20 Planning Manual

7 Planning detector lines

7.1 Planning an FDnet detector line

Building Technologies
Fire Safety
Purpose
During planning of the ↑ detector lines, the load of the ↑ line card is verified. This
produces the following:
● Number and type of devices per detector line
● Number of required line cards
● Number of ↑ loops and ↑ stubs
The planning of the detector lines can be performed as follows:
● With the ↑ outline quantities tool FX2010 (recommended)
● Limited, with these instructions
Planning with the ↑ outline quantities tool FX2010 (document
009716)
The outline quantities tool is an Excel spreadsheet (see diagram), which enables
quick and easy planning.
The system limitations are not contained in the outline quantities tool. They must
be taken from this document.
Figure 16: Outline quantities tool
Planning detector lines
Planning an FDnet detector line
7
59 | 242
008843_v_en_--
2015-12-15