Siemens FS20 Planning Manual page 38

Project planning of indication and operation devices
5
Operation and indication devices
Connection
Operation and
indication devices
Station-internal bus
20 zones EVAC-NL
operating add-on
[NL]
FBA terminal [CH] Station-internal bus
FDnet detector line
Floor repeater
terminal
Floor repeater FDnet detector line
display
Mimic display driver FDnet detector line
Serial interface RS485 From the station or
Mimic display driver
(EVAC)
SintesoView Ethernet interface
(Standalone)
Sinteso Mobile Ethernet interface
FBF [DE]
Fire brigade periphery
module or serial
interface RS485
FAT [DE] Serial interface RS485 Station-internal supply
Telecommunications Serial interface RS485 Station-internal supply
system via ESPA-
4.4.4 interface
38 | 242
Building Technologies
Fire Safety
Supply via
Station-internal supply
Station-internal supply
● ↑ Detector line
● External AC or DC
supply (optional)
● Detector line
● External AC or DC
supply (optional)
● Detector line
● External AC or DC
supply (optional)
external AC or DC
supply
PC
Smartphone
Station-internal supply
Table 4: Connection, power supply and visibility of the operation and indication devices
Only in conjunction with ↑ license key.
1
System-wide visibility is ensured when the station, or a component connected to
2
the station, has been configured for system-wide visibility (e.g. FT2010, FT2011,
printer or FAT).
Observe the notices provided for the corresponding components.
3
In the case of the FC2080, the supply is via the processor unit.
4
Visibility (configurable)
20 zones, system-wide
4
Same visibility as stations with FBA
4
terminal
● System-wide
● Max. five stations support a
system-wide configuration
3
● System-wide
● Max. five stations support a
system-wide configuration
3
System-wide
3
System-wide
3
Same visibility as the station which
is indicated using SintesoView
● System-wide
● Max. five stations support a
system-wide configuration
System-wide
System-wide
System-wide
1
008843_v_en_--
2015-12-15