Siemens FS20 Planning Manual page 94

Planning detector lines
7
Interactive detector line
94 | 242
Building Technologies
Fire Safety
Supported detectors
The ↑ line card (interactive) supports the same recording peripheral equipment as
the corresponding AlgoRex line plug-in modules E3M070, E3M071, K3M071:
● Optical smoke detectors: DO115x
● Radio smoke detectors: DCW1151
● Multi-sensor smoke detectors: DOT115x
● Heat detectors: DT1152
● Linear smoke detectors: DLO1191
● Flame detectors: DF119x
● Manual call points: DM115x
● Contact detectors: DC1157-AA
● Output modules: DC115x
● MSx detectors above DC1192
● Collective detectors above DC1192
● Collective Ex detectors above DC1192 and SB3
● SynoLINE300 above CB320A
DOTE1152 is no longer supported.
Additional documentation
● You will find detailed information on the ↑ line card (interactive) in the 008837
product data.
● You will find detailed information on device compatibility in the 'List of
compatibility'.
● You will find information on the interactive line devices in the corresponding
AlgoRex documents.
● You will find information on key detector figures in AlgoRex document 001508
'Guidelines'.
● You will find information on modernization and migration in documents
A6V10323158 'Modernizing fire detection installations with multiple protocol
detectors' and 009078 Configuration, chapter 'AlgoRex / SIGMASYS data
migration'.
● You will find information about configuration and commissioning in
documents 009052 and 009078.
See chapter 'Applicable documents'.
008843_v_en_--
2015-12-15