Options With Requirements - Siemens FS20 Planning Manual

Options with requirements

3
3 Options with requirements
22 | 242
Building Technologies
Fire Safety
You can implement the following options with requirements using the FS20 fire
detection system. The sections specified below are from EN54-2/A1.
EN54-2/A1 Options with requirements
section
7.8 Output to fire alarm devices
7.9.1 Alarm confirmation input from fire alarm routing equipment
7.9.2 Alarm confirmation input from fire alarm routing equipment
7.10.1 Output type A
7.10.2 Output type B
7.10.3 Output type C
7.10.4 Fault monitoring of fire protection equipment
7.11.1 Delays to outputs
7.11.2 Delays to outputs
7.12.1 Type A dependency*
7.12.2 Type B dependency*
7.12.3 Type C dependency
7.13 Alarm counter
8.3 Fault signals from points
8.9 Output to fault warning routing equipment
9.5 Disablement of addressable points
10 Test condition
*For MS9i and collective detector lines only
008843_v_en_--
2015-12-15