Siemens FS20 Planning Manual page 14

About this document
1
Revision history
Version Edition date
u 2014-01-15
t 2013-11-14
s 06.2012
r 05.2012
14 | 242
Building Technologies
Fire Safety
Brief description
Line card (interactive): DOTE1152 is no longer supported.
AnalogPLUS detector line: DC1135 is no longer supported.
Edition for MP5
Change to date format according to ISO 8601
New:
License keys (Sx) replace license keys (Lx)
LED indicator (internal) FTO2008-A1
Fire terminal (Touch) FT2080-A1
Fire control panels FC2040-GA and FC2030-CC added.
● Chapter ammended: 'Determining the type of station'
● New chapter added: 'Order numbers' – Fire control panel FC2040-GA and
FC2030-CC
Desktop housing for fire terminal:
● Rear cover (FT2080) FHA2039-A1
● Desktop housing (FT2080) FHA2040-A1
Module bus cards for AlgoRex migration:
● Line card (AnalogPLUS) FCL2005-A1
● Line card (interactive) FCL2006-A1
● Line card (interactive Ex) FCL2007-A1
Changes and additions:
● Chapter 'Assembling the FC2080 – Planning overview', number of I/O cards
(programmable) corrected
● FDOOT241-Ax: Restrictions lifted
● 150 W power supplies do not support a battery capacity of 12 Ah
● New chapter: System limits – Outline quantities for hardware
● Information added: If a SAFEDLINK Station is configured as 'GAP' or
'Secondary GAP', it must also be configured as a router or a standby router;
otherwise, local or general access via the Ethernet port will not be possible.
● Network addresses in the chapter 'Planning the networking of the stations'
● Planning operating and indication devices – Mimic display driver FT2001-A1:
Guidelines added (max. 20 devices per station)
● System limits with PMI & mainboard FCM2004: Entry on firmware added.
● 'Order numbers' chapter restructured
● Various minor corrections and adaptations
CPR replaces CPD: The Construction Products Regulation (CPR 305/2011)
replaces the previous Construction Products Directive (CPD 89/106).
License key (L1) for FC2080 removed:
● Chap. 'Fire control panels'
● Chap. 'Installable components'
New chapter added:
● Chap. 'Options with requirements'
Addition of I/O card (remote transmission) for compact control panels FC2030
and FC2060 in various chapters
008843_v_en_--
2015-12-15