Table of Contents
Advertisement
Example of a printout of the data programmed for the speed dialling codes.
CLEARING PROGRAMMED DATA
This section describes the procedure for clearing the data programmed for the one-touch dialling
keys and speed dialling codes.
1. Perform steps 1 to 3 of the "Programming One-Touch Dialling Keys" procedure or steps 1 to
4 of the "Programming Speed Dialling Codes" procedure (this example refers to the one-touch
dialling key procedure).
ONE-TOUCH DIALLING
1: 0034p3p257881
↑ ↑ ↑ ↑ ↑
↓ ↓ ↓ ↓ ↓
2. Press
or
to choose the one-touch dialling key or speed dialling code that you want to select
(or type the one-touch dialling number or speed dialling code on the numeric keypad).
Example: select one-touch dialling key 6.
ONE-TOUCH DIALLING
6: 0034p3p567889
3. Press CLEAR. All the parameters for the one-touch dialling key selected are cleared.
ONE-TOUCH DIALLING
6:
4. Reprogram the key, or press
to exit from the menu.
↑ ↑ ↑ ↑ ↑
↓ ↓ ↓ ↓ ↓
or
to move to another key to be cleared, or press STOP
57
Advertisement
Table of Contents
