Installation Site - Olivetti OFX 2200 Instructions Manual

Table of Contents

Advertisement

INSTALLATION SITE

The facsimile machine must be placed on a stable surface. There must be sufficient free space
around it for air to circulate and the output document tray to be positioned correctly so that paper
does not pile up, increasing the likelihood of jams. The tray also enables the facsimile machine to
be placed beside a table, thus saving a considerable amount of space.
The machine must not be exposed to sunlight, installed in a damp or dusty room or subjected to
sharp changes in temperature and humidity.
To avoid installing a new telephone line, position the machine near an existing telephone socket,
where possible.
In addition, make sure that the electrical socket, which must be used exclusively by the facsimile
machine, is connected to ground.
NOTICE: The manufacturers decline all liability for improper use or installation, connection to
unauthorized devices or tampering by unauthorized staff.
WARNING: THIS MACHINE MUST BE CONNECTED TO GROUND!
When the ON/OFF switch is in its OFF position, the facsimile machine is still powered.
To cut off the power supply, unplug the power cable from the mains socket, which must
be easily accessible.
4

Advertisement

Table of Contents
loading

Table of Contents