Table of Contents
Advertisement
SIGNALS
AUDIBLE SIGNALS
The facsimile machine emits the following types of audible signal:
-
brief (1 second)
indicates that the transaction has been concluded successfully
-
long (3 seconds)/the ERROR LED lights up
indicates that the transaction was concluded unsuccessfully. Press STOP and check the type
of error on the corresponding report (last transmission/reception)
-
blinking (continually)
the handset is off the hook. Hang up and press STOP
-
blinking (in intervals)
the TALK function has been activated
MESSAGES ON THE DISPLAY
The table below shows a list of the messages that may appear on the display, together with their
meaning and the action to be taken to eliminate the problem.
MESSAGE
DOC. RECEIVED IN MEMORY
OUT OF INK
ADD PAPER
CHECK PRINTING QUALITY
CHECK THE DOCUMENT (nn)
REMOTE
DIAG.
REMOVE
DOCUMENT
94
MEANING
The
documents
received
stored in the memory because there was
an
error
preventing
them
printed immediately.
There is no ink in the cartridge.
There is no paper left.
Some of the nozzles on the print head are
not working and this is having a negative
effect on the print quality.
There is no document in the ADF, it is
jammed or is over 2 metres long.
A remote diagnostic test session is in
progress.
Scanning
of
the
document
interrupted.
ACTION
have
been
Check the type of error (out of
paper or ink, etc.) and correct it.
from
being
Replace the cartridge.
Put some paper in the cassette
and
check
positioning lever is in its lower
position.
Make a copy of a document: if the
quality is acceptable, press STOP
to
momentarily
message (which will be displayed
again the next time the cover is
opened or print head is adjusted)
otherwise carry out the manual
nozzle
testing
(Maintenance).
Insert the document or eliminate
the jam.
None.
was
Remove
the
reposition it correctly.
that
the
paper
eliminate
the
procedure
document
and
F
Advertisement
Table of Contents
