Table of Contents
Advertisement
11. Press START. The display shows the parameter "DIAL TYPE FOR PUB. NET." (in some
countries, this parameter cannot be accessed).
INSTALLATION PARAMETERS
DIAL TYPE FOR PUB. NET.
12. Press START again.
DIAL TYPE FOR PUB. NET.
PULSE
By pressing ↑ ↑ ↑ ↑ ↑ or ↓, ↓, ↓, ↓, ↓, select the type of dialling towards the public network: pulse or tone, and
confirm by pressing START.
INSTALLATION PARAMETERS
NO.RING FOR AUTOMATIC RX
13. Press START. This parameter determines the number of rings (from 1 to 9) to be counted
before the facsimile machine answers an incoming call. Set the desired number of rings and
confirm by pressing START.
INSTALLATION PARAMETERS
REDIAL NO.
14. Press START. The redial number represents the number of attempts (from 1 to 9) made by
the machine when it finds the correspondent's number busy or receives no answer. Set a
number of redials and confirm by pressing START.
INSTALLATION PARAMETERS
TIME BETWEEN REDIALS
15. Press START. This parameter determines the delay (from 10 to 999 seconds) between one
redial and the next. Set the desired delay and confirm by pressing START. The display shows
the next parameter "FAX/PHONE ALARM DURATION" (in some countries, this parameter
cannot be accessed).
INSTALLATION PARAMETERS
FAX/PHONE ALARM DURATION
16. Press START. This parameter determines the delay (from 10 to 99 seconds) counted by the
machine before preparing to receive a document. It is associated with the set-up parameter
"FAX/PHONE" (see the second part of the manual "Getting the Best from Your Facsimile
Machine"). Set the desired delay and confirm by pressing START.
17. You have how completed the procedure. Press STOP. The facsimile machine returns to
standby.
15
Advertisement
Table of Contents
