Setting The Installation Parameters; Printing The Installation Parameters; Changing The Installation Parameters - Olivetti OFX 2200 Instructions Manual

SETTING THE INSTALLATION PARAMETERS

The last phase of the installation procedure consists of setting parameters that determine how the
machine is to operate. The procedure below assumes that you can access all the installation
parameters but this may not be the case. In fact, depending on the country where you live, some
of them may be "hidden" as local legislation specifies that they can be changed exclusively by
service engineers.
A general rule to be followed is not to change the settings made by the manufacturers unless you
are sure that no errors will result and to print the current installation parameters before changing
them.
Having changed the relevant installation parameters, the machine can be used with the basic
configuration set by the manufacturers. You can tailor the configuration to your specific needs later
on when you have become more familiar with the machine, having read the manual and identified
your precise requirements, to ensure that the configuration set will be the one most suited to your
&
activity Getting the Best from Your Facsimile Machine, page 30 .

PRINTING THE INSTALLATION PARAMETERS

1. Press FUNCTION followed by 5.
FUNCTION
5. SET-UP
2. Press START.
5. SET-UP
USER DATA
3. Press ↓ ↓ ↓ ↓ ↓ twice.
5. SET-UP
INSTALLATION PARAMETERS
4. Press PRINT.

CHANGING THE INSTALLATION PARAMETERS

I
To enter the data, see the Operation Summary,
1. Press FUNCTION followed by 5.
FUNCTION
5. SET-UP
12
[0-9]
[0-9]
4
The procedures, page 46.