Changing/Clearing A Preset Delayed Transmission - Olivetti OFX 520 Instruction Manual

Procedure
1 Make sure that the
display shows the initial
waiting mode with date
and time.
2 Insert the document in
ADF.
3 Select the contrast and
resolution you consider
most appropriate.
4 Press the FUNCTION
key until the display
shows --->
5 Press the START key.
The display requests
you to enter the time of
transmission. e.g.
"17:00".
6 Press the START key.
7 Dial the number of the
remote party, using any
one of the dialling
procedures. For
example, key-in the
number directly on the
numeric keypad of your
fax.
8 Press the START key
to confirm the setting. If
the fax machine is
enabled, it will
automatically print the
parameters of the
delayed transmission
(see in this chapter
"Reports and lists"),
and "PRINT DELAY
TX" is displayed. It then
returns to its initial
waiting mode.
You can clear the setting for the delayed transmission
by removing the document from ADF or by pressing
the STOP key.
-3-10-27.p65
DISPLAY
AUTOMATIC RX
22-03-99 15:10
DOCUMENT READY
ê
NORMAL
DELAYED TX
TYPE TIME
HH:MM
TYPE FAX NUMBER
NUM/TOUCH/SPEED
TYPE NUMBER
011 233323
AUTOMATIC RX
TX AT 17:00
15
CHANGING/CLEARING A PRESET DELAYED
TRANSMISSION...
Procedure
1 Make sure that you
have set a delayed
transmission.
2 Press the FUNCTION
key until the display
shows --->
3 Press the START key.
4 Press the START key.
If you want to clear the transmission you have
set previously, press the > key : the display shows
the message "CANCEL SETTING?",
then press START to confirm deletion.
The fax machine automatically returns to the initial
waiting condition. If you wish to change the time of the
transmission or the number of the recipient you wish
to send the document to, follow the steps below.
5 Press the START key.
If you wish to restore current time, press the CLEAR
key, the START key, and follow the steps below.
6 Overwrite the new time,
then confirm the setting
with the START key or
confirm the existing
time by directly
pressing the START
key.
7 Overwrite the new
number and confirm the
setting with the START
key or confirm the
existing one by directly
pressing the START
key. The fax machine
automatically returns to
the initial waiting mode.
25/02/00, 9.16
DISPLAY
AUTOMATIC RX
TX AT 17:00
DELAYED TX
ALREADY ENTERED
CHANGE PARAM.?
TYPE TIME
HH:MM
TYPE NUMBER
06 3361551
AUTOMATIC RX
TX AT 18:00
15