Transport Inspection And Reporting Of Defects; Relocation Of The Machine - Trotec Speedy 360 flexx Operation Manual

Speedy 360
6.5

Transport inspection and reporting of defects

Upon receipt, immediately inspect the delivery to ensure that it is complete and has not suffered any
damage. If any transport damage is visible, do not accept the delivery, or accept it only with
reservation. Record the scope of the damage on the transport documents/delivery note. Initiate the
complaint process. For all defects that are not discovered upon delivery, be sure to report them as
soon as they are detected, since damage claims must be filed within a certain period, as mandated by
law.
6.6

Relocation of the machine

Please follow the transport safety instructions and observe the transport conditions
described in the chapters "Safety notes" and "Transport".
When transporting the machine over longer distances, the original transport box
including interior protection needs to be used.
Steps:
1. Switch off the machine.
2. Unplug the electrical power supply.
3. Remove the exhaust system.
4. Relocate the machine (using auxiliary equipment if necessary) and place it on clean, solid level
ground again.
5. After the transport, adjust the machine, setup the electrics and carry out a function test.
BA 8032_2.2_EN (05/2016)
www.troteclaser.com
51 / 90