Table of Contents
Advertisement
Speedy 360
8.7
Focusing methods
Precise laser engraving depends on several factors. Apart from the right choice of lens, working tables
and a corresponding exhaust system, correct focusing plays a key role.
The correct setting of the focus, which means the right distance between the laser head and the
material to be engraved, is crucial for a perfect application result.
Manual focus mode
-
Focus tool
Automatic focus modes
-
Software focus (JobControl
-
Light bar focus
-
Sonar Technology™ (automatic focusing with ultrasonic sensor)
The machine described in this manuals is equipped either with light bar focus or Sonar
Technology™.
Defects from head crashes (working head hits material or working table) are excluded
from warranty.
If workpieces with more than 30 kg have been placed on the table, the table must not be
moved up or down anymore as this might damage the mechanics of the machine.
It is mandatory to focus on the height of the material before loading material of 30 kg and
above.
BA 8032_2.2_EN (05/2016)
®
)
www.troteclaser.com
63 / 90
Advertisement
Table of Contents
