Table of Contents
Advertisement
Speedy 360
5.1.1
Operation panel
1.Status indicator: Laser beam
LED ON: The machine is processing or
receiving data
2
Button: Standby
LED ON: Standby Mode
LED OFF: Ready Mode
3 Button: Home
LED ON: Home position
temporarily changed
4 Button: X/Y position laser head
-
X-axis direction
-Y-axis direction
5 Button: Z position working table
-Up
-Down
Focus automatically (Autofocus)
No
1
Status indicator:
Laser beam
2
Button:
Standby
Button:
3
Home
Button:
4
X/Y position laser
head
BA 8032_2.2_EN (05/2016)
Description
LED ON: The machine is processing or receiving data.
Press the button to switch to "Standby" mode (LED ON). Press the
button again to switch back to "Ready" mode (LED OFF).
When the button is pressed while the Z axis is moving (e.g. during
autofocus), the machine enters "Standby" mode only after finishing
the Z axis movement.
Press the button for 3 sec. to temporarily define the position of the
laser head as home position. (Marker in JobControl
LED ON: Home position temporarily changed
To deactivate the temporary home position, press Shift + Home.
Press the button to manually move the laser head to the right, left,
front or back.
Press two of the four X/Y position keys simultaneously to move the
laser head diagonally.
Press Shift together with one of the X/Y position keys to move the
laser head quickly to the corresponding end position.
6. Button: Stop
7. Button: Start/Pause/Repeat
LED ON: Pause
Pressing the button after job completion
will start repetition
8. Status LEDs
9. Button: Shift
Second operating level
10.Button: Exhaust
LED ON: Exhaust active
®
)
www.troteclaser.com
37 / 90
Advertisement
Table of Contents
