Liability And Warranty - Trotec Speedy 360 flexx Operation Manual

Speedy 360
1.3

Liability and warranty

All information, illustrations, tables, specifications and diagrams contained in this operation manual
have been carefully compiled according to the current state of technology. No liability is accepted with
regard to errors, missing information and any resulting damage or consequential loss.
Strict compliance with the safety procedures described in this operation manual and extreme caution
when using the equipment are essential for avoiding and reducing the possibility of personal injury or
damage to the equipment. The manufacturer shall not be liable for any damage and or faults resulting
from non-observance of instructions in the manual.
Additionally, Trotec Laser GmbH shall not be held responsible for any personal injury or property
damage, of either an indirect or specific nature, consequential loss, loss of commercial profits,
interruption to business, or loss of commercial information resulting from use of the equipment
described in this manual.
Furthermore, Trotec Laser GmbH shall accept no liability whatsoever for damage caused by the use of
non-original parts and accessories.
Any software forming part of this equipment may be used only for the purposes for which it was
supplied by Trotec Laser GmbH. It is strictly prohibited to make any alterations, to prepare
translations, decompile or disassemble the software.
Trotec Laser GmbH reserves the right to update any of the information, illustrations, tables,
specifications and diagrams contained in this operation manual with regard to technical developments
at any time without notice.
www.troteclaser.com
BA 8032_2.2_EN (05/2016) 8 / 90