Safety Devices - Trotec Speedy 360 flexx Operation Manual

Speedy 360
2.7

Safety devices

WARNING
Danger from laser beam
Safety and protection devices that are not installed or are not fully functional can lead to
bodily injury and material damage.

Do not remove, modify or deactivate the safety interlock switches or protective covers
on the machine. Safety and protection devices must be fully functional at all times.

In case of assumed or presumed damage of safety devices, disconnect the machine
from the mains.

Damaged safety and protection devices need to be replaced by a Trotec technician
immediately.
The machine is equipped with the following safety devices:
1
7
5
No. Description
1 Main switch
2 Option: Emergency stop button (only with
temperature sensor option)
3 Option: Temperature sensor reset button
(only with temperature sensor option)
4 Key switch
BA 8032_2.2_EN (05/2016)
8 5
No.
5
6
7
8
6
2
3
4
5
Description
Interlock safety switch
Side panel right (with interlock safety
switch)
Side panel left (with interlock safety
switch)
Acrylic top lid
www.troteclaser.com
19 / 90