Lens Placement; Lens Position - Trotec Speedy 360 flexx Operation Manual

Speedy 360
8.5

Lens placement

8.5.1

Lens position

The following lenses must be inserted below the clamping ring:
All other available lenses must be inserted above the clamping ring.
BA 8032_2.2_EN (05/2016)
1. Loosen lens (1) by turning the clamping ring
2. Remove lens (1)
3. Check lens (1) for damage
4. If necessary, clean both sides of
2
1
5. Check lens (1) once more for damage
6. Insert the lens (1) with the lettering facing up,
7. When inserting the lens (1) above the
8. Fixate the lens with the clamping ring (2)
1
2
1,5" red
inward (2)
the lens (1) with cleaning liquid
and cleaning tissue (see
chapter "Cleaning the lens")
either above or below the clamping ring (2)
depending on the lens type
clamping ring (2), turn the clamping ring
beforehand.
2,0" CL brown
www.troteclaser.com
61 / 90