Table of Contents
Advertisement
Speedy 360
2.4.2
Responsibilities of the operating personnel
-
Always wear the necessary personal protective equipment (e.g. protective goggles).
-
It is the duty of the operating personnel to check the machine before start of work for
externally visible damage and defects, and to immediately report any changes that appear
(including behavior during operation) that may affect the safety of the machine. It must be
made sure that the machine is operated only in perfect condition.
-
The machine must not be left unattended while it is operating.
-
Switch off the machine described herein at the main switch for periods of non-use.
-
Operate the machine described here only with a lens in place. A missing lens may cause
the unfocused beam to be reflected out of the housing.
-
Stop the machine immediately in case of failure.
-
No working methods are permitted that affect the safety of persons or of the machine.
-
Always keep clean the machine and its components such as lens and mirrors.
2.5
Operating and service personnel requirements
-
The personnel must have read and understood this Operation Manual and in particular the
"Safety" section.
-
The personnel must not be under the influence of drugs, alcohol or reaction-impairing
medication when working on or with the machine.
-
The personnel must be familiar with using the fire extinguisher.
-
The personnel must be trained in order to be qualified to operate the machine. If the
personnel lack the necessary knowledge for working on or with the machine, they must
first be trained.
Activity
Control/ operation/ other
activities
(e.g. troubleshooting,
maintenance)
BA 8032_2.2_EN (05/2016)
Intended user
Definition
group
Qualified
Qualified personnel are those who can
personnel or
judge the work entrusted to them and
Trotec
detect potential risks based on their
technicians
occupational training, knowledge and
experience as well as their understanding
of the relevant regulations.
www.troteclaser.com
16 / 90
Advertisement
Table of Contents
