Table of Contents
Advertisement
Speedy 360
2.7.1
Main switch
The main switch disconnects the machine from the mains power supply.
2.7.2
Key switch
Turning the key switch powers off the motor, laser source and electric system. Through the key switch,
operation by non-authorized personnel can be prevented.
2.7.3
Temperature sensor reset button (option)
The temperature sensors ensure reliable temperature monitoring of the interior of the machine and are
available as additional option.
If a preset temperature value is exceeded, an acoustic alarm continuously sounds to warn the
operator of abnormal temperature trends during processing.
WARNING
Fire
The acoustic alarm upon startup of the machine indicates that the sensors are operating
properly. However, the sensors do not guarantee fire prevention.
-
The unit must not operate unattended despite the integrated temperature sensors!
-
If the acoustic alarm does not sound when the machine is switched on, check that the
sensors are functional, or contact your local support team.
2.7.3.1 Functional test of the temperature sensors
When the machine with the temperature sensor option is activated, all sensors are checked for proper
function, and you will hear an acoustic signal.
If you do not hear an acoustic signal, please check the cables, connections, etc., or contact your local
technical support team.
2.7.3.2 Temperature sensor alarm acknowledgement
-
Press the temperature sensor reset button
to acknowledge the alarm.
BA 8032_2.2_EN (05/2016)
Temperature sensor
reset button
www.troteclaser.com
20 / 90
Advertisement
Table of Contents
